China OEM D3s Xenon Suppliers – T4 HID Ballast Asic With Strong Canbus 12V High Quality New Hid Xenon Ballast 35W 55W – Bulletek

Model:

T4-CANBUS: T4-C3-35W, T4-C5-55W; T4-Fast start: T4-F3-35W, T4-F5-55W.

ASIC main chip:

ASIC: application specific integrated circuit; High integrated, more efficient and stable; Low voltage start: V-start of chip: 7-7.3V, ballast starts at 8.5V; High frequency ±300Hz(≥250Hz/other ballasts); FSW(frequency switch)=150KHz, combining canbus and fast bright perfectly; Pass flashing test(max 4 times/second), no flicker or off.

Solid state PCB:

4 layers PCB, better circuit layout; Only 70+pcs SMD components; Simple, efficient and low defective rate.

Super CANBUS decoder:

20000+1000uF capacitor; High level solution; Pass BMW E-series,F-series, Mini; Pass BENZ C200; Pass VW Tiguan, Sagitar, Lavida; Pass AUDI A-series; Pass BUICK-Envision; Pass JEEP-Campass; Pass FORD-Focus; Pass KIA-K3; Pass DODGE, etc

EMC:

Low impilse: Low impulse current wave, stable current; EMC wire cable: Copper+PET packing input & output wires for shielding electromagnetic interference; Solving radio/audio/electronic devices interference problem.

Ground wire:

Separated ground wire connects the bracket to ground for safety; Avoiding the leakage of electricity; Enhancing the EMC function.

Strong start voltage:

23000±3000V high voltage produced by ignition coil; Fast full bright and strong lighting up; Good components for long life span and more brightness.

Strong light up:

Lighting up old/cheap bulbs(V-op ＞140V, new/good bulbs are 85V±17V) at one time; 35W/42W constant P-out(effective).

Constant power output:

Precisely constant power output by checking the current and voltage of loaded bulbs; Tolerance is ±0.2W.

Stable current:

I-start: max 5.5A@13.5V/T4-C3/C5, max 7.5A@13.5V/T4-F3/F5; I-op: 3.1A/4.2A@13.5V; Time-steady: ≤10s.

Low start impulse:

Current 54.4A/2.50ms(60A+/other ballasts); Lighting up stable, no flicker.

Ultra thin:

9mm height of components; 12mm height of ballast; More efficient heat dissipation; Easy installation.

Unique mounting bracket:

Push & stick, easy installation; Cross-ventilation cooling; Top quality 3M sticker on back.

T4 Full hid conversion kit: 2pcs ballast + 1pair(2pcs) hid xenon bulb + 2pcs wire cable + 1 pc kit box

Dimension: 88 * 71 * 12 mm

Package:

Hard box: 130*108*55mm; Customized is accepted